John Lewis JLBIIH603 Manual de usuario descargar pdf (Pagina 10)

• you cover a sensor field with an object (a

pan, a cloth, etc.) for longer than 10

seconds. The sound operates until you

remove the object.

• the hob gets too hot (e.g. when a

saucepan boils dry). Before you use the

hob again, the cooking zone must be cool.

• you use incorrect cookware.

comes on

in the display and after 2 minutes the

cooking zone stops automatically.

• you do not stop a cooking zone or change

the heat setting. After some time

comes on and the hob stops. See the table.

Automatic Switch Off times

Heat setting

- - -

Stops after

6 hours 5 hours 4 hours 1.5 hours

The heat setting

Touch to increase the heat setting. Touch

to decrease the heat setting. The display

shows the heat setting. Touch

and at

the same time to switch off the cooking zone.

Automatic Heat Up

1

2

3

4

5

6

7

8

9

10

11

0

123456789

You can get a necessary heat setting in a

shorter time if you activate the Automatic

Heat Up function. This function sets the

highest heat setting for some time (see the

graphic), and then decreases to the

necessary heat setting.

To start the Automatic Heat Up function:

1. Touch

. comes on in the display.

2. Touch

again and again until comes

on in the display.

3. Immediately touch

again and again

until the necessary heat setting comes

on. After 3 seconds

comes on in the

display.

To stop the function touch

.

Switching the Power

function on and off

The Power function makes more power

available to the induction cooking zones.

The Power function is activated for 10

minutes at most. After that the induction

cooking zone automatically switches back to

the highest heat setting. To switch on, touch

, comes on. To switch off, touch or

.

10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comentarios a estos manuales

Sin comentarios