John Lewis JLBIGGH756 Manual de usuario descargar pdf (Pagina 10)

Warning! Be very careful

when you use open fire in the

kitchen environment. The

manufacturer declines any

responsibility in case of the

flame misuse.

1. Push the control knob down and turn it

counterclockwise to the maximum gas supply

position (

).

2. Keep the control knob pushed for equal or less

than 10 seconds. This lets the thermocouple

warm up. If not, the gas supply is interrupted.

3. Adjust the flame after it is regular.

If after some tries the burner does

not light, check if the crown and its

cap are in correct positions.

Warning! Do not keep the

control knob pushed for more

than 15 seconds. If the burner

does not light after 15

seconds, release the control

knob, turn it into off position

and try to light the burner

again after minimum 1

minute.

Caution! In the absence of

electricity you can ignite the

burner without electrical

device; in this case approach

the burner with a flame, turn

the control knob counter-

clockwise to maximum gas

supply position and push it

down. Keep the control knob

pushed for equal or less than

10 seconds to let the

thermocouple warm up.

If the burner accidentally goes out,

turn the control knob to the off

position and try to light the burner

again after minimum 1 minute.

The spark generator can start

automatically when you switch on

the mains, after installation or a

power cut. It is normal.

Turning the burner off

To put the flame out, turn the knob to the off

position .

Warning! Always turn the

flame down or switch it off

before you remove the pans

from the burner.

Hob User Manual10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Comentarios a estos manuales

Sin comentarios