John Lewis JLBIGH602 Manual de usuario Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 24
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
Care and cleaning
Warning! Refer to the Safety
chapters.
Warning! Deactivate the
appliance and let it cool down
before you clean it. Disconnect
the appliance from the electrical
supply before you do cleaning or
maintenance work.
Scratches or dark stains on the surface
have no effect on how the appliance
operates.
You can remove the pan supports to easily
clean the hob.
To clean the enamelled parts, cap and crown,
wash them with warm soapy water and dry
them carefully before you put them back.
Wash stainless steel parts with water, and
then dry them with a soft cloth.
The pan supports are not dishwasher proof.
They must be washed by hand.
When you wash the pan supports by hand,
take care when you dry them as the
enamelling process occasionally leaves rough
edges. If necessary, remove stubborn stains
using a paste cleaner.
Make sure you position the pan supports
correctly after cleaning.
To make the burners work correctly, make
sure that the arms of the pan supports are in
the centre of the burner.
Be very careful when you replace the
pan supports to prevent the hob top
from damage.
After cleaning, dry the appliance with a soft
cloth.
Removing the dirt:
1.
Remove immediately: melting plastic,
plastic foil, and food containing sugar.
Stop the appliance and let it cool
down before you clean: limescale rings,
water rings, fat stains, shiny metallic
discolorations. Use a special cleaner
applicable for surface of hob.
2. Clean the appliance with a damp cloth and
some detergent.
3.
At the end rub the appliance dry with a
clean cloth.
The stainless steel can become tarnished if it is
too much heated. Refer to this you must not
cook with potstones, earthenware pans or cast
iron plates.
Cleaning of the spark plug
This feature is obtained through a ceramic
ignition candle with a metal electrode. Keep
these components well clean to prevent difficult
lighting and check that the burner crown holes
are not obstructed.
Hob user manual 11
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Comentarios a estos manuales

Sin comentarios