John Lewis JLBIGGH704 Manual de usuario descargar pdf (Pagina 10)

Replacing the injectorsReplacing the injectors

Replacing the injectors

1. Remove the pan supports.

2. Remove the burner caps and crowns.

3. Using a 7 mm socket spanner

unscrew and remove the

injectors

, then replace them with the ones required for

the new type of gas

(see the table “Burner characteristics”).

Reassemble the parts, following the same procedure

backwards.

5. Replace the Gas Type Label (located near the gas supply

connection) with the one corresponding to the new type

of gas. The label is supplied in the accessories plastic bag.

Should the feeding gas pressure be different or variable

compared with the required pressure, an appropriate pressure

regulator must be fitted on the gas supply pipe, in compliance

with the rules in force.

GAS BURNER INJECTOR NOMINAL REDUCED NOMINAL FEEDING

TYPE TYPE REFERENCE THERMAL THERMAL FLOW RATE PRESSURE

1/100 mm POWER POWER

kW kW m

/h g/h mbar

Rapid 119 2.9 0.65 0.276

Semirapid 96 1.9 0.45 0.181 - 20

Auxiliary 70 1.0 0.33 0.095 -

Rapid 86 2.7 0.65 - 196

Semirapid 71 1.9 0.45 - 138 28-30/37

Auxiliary 50 1.0 0.33 - 73

Burner characteristicsBurner characteristics

Burner characteristics

ConCon

Con

ersion frersion fr

ersion fr

om Natural Gas to LPGom Natural Gas to LPG

om Natural Gas to LPG

NATURAL

GAS (G20)

LIQUID

GAS

(Butane/

Propane)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Comentarios a estos manuales

Sin comentarios

John Lewis JLBIGGH704 Manual de usuario Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Placas John Lewis JLBIGGH704