John Lewis JLFSMC613 Manual de usuario descargar pdf (Pagina 35)

You must install the second component (A) on

the wall. Make sure that the wall is made of a

solid material. If not, you need to make the wall

sufficiently strong to hold the weight. Make sure

that the surface behind the appliance is smooth.

Make the hole, in which you install the

component on the wall, approximately 77 mm

from the top of the appliance. Make sure that

the component is on the correct height. Use a

screw to install it. (See the second illustration).

50 mm

77 mm

Make sure that the anti-tilt protection goes into

the hole on the rear wall of the appliance. After

you push the appliance, the anti-tilt protection

must to go into the hole for a minimum of 20

mm.

The space between the bench cupboards

cannot be wider than the appliance. If this

occurs, adjust the space on the two sides of the

appliance. Put the appliance in the center of the

space.

Warning! These instructions are

only valid in the countries whose

symbols appear on this booklet's

cover.

Gas Category I2H

Gas Supply G20 (2H) 20mbar

Gas burners

BURNER NORMAL POWER NATURAL GAS

kW inj. 100/mm Btu/h

Auxiliary burner 1,0 70 3412

Semi-rapid burner 1,9 96 6483

Triple Crown 3,4 136 11600

Gas Connection

Use a flexible pipe in compliance with the

regulation in force. Be careful they do not come

in touch with mobile parts or they are not

squeezed.

Warning! Only a qualified and

competent person must do the

gas installation.

Cooker user manual 35

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 43 44

Comentarios a estos manuales

Sin comentarios

John Lewis JLFSMC613 Manual de usuario Pagina 35

Comentarios a estos manuales

Relacionado con productos y manuales para Placas John Lewis JLFSMC613