
Step Control panel Display/Signal
1.
Switch the appliance on
2.
Touch of both the cooking zones at the front simultaneously for 4
seconds.
Until the appliance is next switched off, it can used as normal. After switching off the appliance, the
child safety device is active again.
After overriding the child safety device, a heat setting or a function must be set within
approx. 10 seconds, otherwise the appliance automatically switches itself off.
Automatic switch off
Cooking surface
• If after switching on the cooking surface, a
heat setting is not set for a cooking zone
within approx. 10 seconds, the cooking
surface automatically switches itself off.
• If one or more sensor fields are covered by
objects (a pan, cloths, etc.) for longer than
approx. 10 seconds, a signal sounds and the
cooking surface switches off automatically.
• If all cooking zones are switched off, the
cooking surface automatically switches
itself off after approx. 10 seconds.
Cooking zones
• If one of the cooking zones is not switched
off after a certain time, or if the heat setting
is not modified, the relevant cooking zone
switches off automatically.
is displayed.
Before being used again, the cooking zone
must be set to
.
Heat setting Switches off after
-
6 hours
-
5 hours
4 hours
-
1.5 hours
When the hob is first installed
Warning! Remove all packaging,
both inside and outside the hob
including the advertising labels and any
protective film, before using the hob.
When a cooking zone is switched on,
it may hum briefly. This is a
characteristic of all ceramic glass
cooking zones and does not impair
either the function or the life of the
appliance.
8
Comentarios a estos manuales